Rehabilitation Engineering Technician in Oxford inOxford PUBLISHED TUE 4 NOV 2025 Jump to job information section
Band 4: £27,485 to £30,162 a year per annum
FIXEDTERM
NO SPONSORSHIP
Job description
Job summary
We are looking for applicants with good mechanical workshop skills with a positive and flexible attitude to join our team.The Rehabilitation Engineering Department provides technical support to Oxfordshire Wheelchair service and the Specialist Disability Service atthe Oxford Centre for Enablement. We are an established manufacturer of custom contour seating and a specialist provider of mobile armsupports. We apply engineering principles and technology in the provision of services to meet the needs of individuals with disabilities. Thewheelchairs and seating systems we provide are individually specified prescriptions which frequently require custom made devices andmodifications to enable independence. The post holder will be required to manufacture and set up equipment as well as providing support to theRehabilitation Engineers.To arrange an informal discussion or visit please contact Zoe Hadley, Rehabilitation Engineering team lead, at only apply if you already have a right to work in the UK until October 2028 this role is not eligible for visa sponsorships.
Main duties of the job
We do not expect applicants to have
Experience
in all of these areas, but are looking for someone who is able to use tools and has the right attitude and aptitude for the role.The Technician will manufacture custom contour seating and wheelchair accessories in both milled foam and Lynx sheet either working toengineers' drawings or instructions.Training will be provided on our specific processes and manufacturing techniques.The Technician will manufacture parts and components for stock as requested and will also maintain local components stock.Post holders are expected to be able to use a range of hand and power tools.
About us
Oxford University Hospitals NHS Foundation Trustis one of the largest NHS teaching trusts in the country. It provides a wide range of general and specialist clinical services and is a base for medical education, training and research. The Trust comprises four hospitals - the John Radcliffe Hospital, Churchill Hospital and Nuffield Orthopaedic Centre in Headington and the Horton General Hospital in Banbury.Our values, standards and behaviours define the quality of clinical care we offer and the professional relationships we make with our patients, colleagues and the wider community.We call this Delivering Compassionate Excellence, and its focus is on our values of compassion, respect, learning, delivery, improvement and excellence.These values put patients at the heart of what we do and underpin the quality healthcare we would like for ourselves or a member of our family. Watch how we set out to deliver compassionate excellence via theOUH YouTube channel.In 2023NHS England launched its first sexual safety charter, and our Trust proudly signed it. We pledge zero tolerance for inappropriate sexual behaviour and commit to the ten core principlesOxford University Hospitals promotes a safe, respectful hiring environment.If you want to make a difference with us, come and join our team. Together, we will uphold the highest standards of care and professionalism.
Details
Date posted
04 November 2025
Pay scheme
Agenda for changeBandBand 4
Salary
£27,485 to £30,162 a year per annum
Contract
Fixed termDuration3 years
Working pattern
Full-time
Reference number
321-MRC-7571560-B4-EXT
Job location
sNuffield Orthopaedic CentreWindmill RoadOxfordOX3 7HE
Job description
Job responsibilities
The Technician will manufacture custom contour seating in both milled foam and Lynx sheet either working to engineers drawings or instructions.The Technician will manufacture parts and components for stock as requested and will also maintain local components stock. Comply with all health and Safety requirements Manufacture custom contour seating from Lynx and foam, working to engineers drawings or instructions. (including all elements ofmanufacture). Manufacture components for mobile arm supports and prepare mobile arm support kits for assessment and issue. Be responsible for monitoring and maintaining stock levels in the workshop areas. Communicate and work with staff in stores to ensuredepartmental stock levels in stores are maintained and highlight any issues with stock and suppliers. Source suppliers for parts and components. Manufacture and assemble components and parts for stock as requested using mechanical workshop skills. Monitor and maintain casting bags, performing regular checks and repairing damaged casting bags where possible. Produce patterns for upholstery work that will be outsourced to external companies. Communicate effectively with team members and external companies regarding technical and sensitive information. Upholstery work using a range of sewing machines and hand techniques. Assist Rehabilitation Engineering team members in clinics with technical work, assist with setting up equipment and assist with takingequipment to and from the clinic rooms and vans. Set up seating and accessories on wheelchairs working to instructions from the engineers and/or manufacturers instructions. Thisincludes custom manufactured parts and third party components. Document work completed and contribute to technical files and patient records. Set up and operate the CNC machine to manufacture custom contoured seating as specified by a rehabilitation Engineer. Set upfoam blocks, setup the CNC machine, check the toolpaths, remove foam blocks and clean CNC machine post machining. Contribute to servicing and maintenance of equipment. Maintain a schedule of work and diary appointments ensuring equipment is ready for planned appointments. Produce equipment to acommercial standard within tight deadlines. Assemble, manufacture and repair mechanical devices using hand tools and precision workshop machinery. Contribute to multi-disciplinary teams by discussing own and others input around clients needs. Communicate technical informationwhist taking account of the understanding of the target audience. Have an understanding of disabling conditions and their implications on equipment prescription and use. Attend and contribute to in-service training. Equipment management activities and technical work will occasionally require the post holder to work in awkward positions. It will frequently be necessary to maintain concentration whilst responding to requests from staff and clients for technical support. Thepost will involve occasional exposure to noise and dust in workshops.Complete drawings on CAD fusion 360.Other roles requested as appropriate at this level.
Job description
Person Specification
Qualifications
EssentialGrade C or above English and Maths GCSEsNVQ Level 2 Mechanical Engineering or equivalent training in practical engineering skills.DesirableMechanical Engineering QualificationBTEC level 2 Mechanical Engineering
Experience
EssentialSkilled in the use of mechanical workshop equipment independentlySkilled in the use of hand held power tools independentlyPractical approach to problem solvingProven ability to manufacture or assemble components to tight deadlinesDesirable
Experience
working with people with disabilitiesUnderstanding of disability issuesCompetent and
Experience
d in the manufacture of foam and Lynx seating systemsKnowledge of wheelchairs and seating componentsPersonal SkillsEssentialGood communication skillsSelf-motivated with ability to work independently on own initiativeWilling to learn new skillsMethodical and thorough approach to work activitiesSelf-organisedGood attention to detailAble to work under pressureAble to follow instructions from other team membersPhysically able to assist in moving and positioning people and equipmentBehavioural SkillsEssentialPrepared to adjust working hours to suit clinicsMethodical and thorough approach to work activitiesSelf-organisedTechnical SkillsEssentialCompetent in Microsoft Office applicationsExcellent dexterityDesirable
Experience
in CAD/CAM systems
Person Specification
Experience
in CAD/CAM systems
Disclosure and Barring Service Check
This post is subject to the Rehabilitation of Offenders Act (Exceptions Order) 1975 and as such it will be necessary for a submission for Disclosure to be made to the Disclosure and Barring Service (formerly known as CRB) to check for any previous criminal convictions.Employer
Details
We are looking for applicants with good mechanical workshop skills with a positive and flexible attitude to join our team.The Rehabilitation Engineering Department provides technical support to Oxfordshire Wheelchair service and the Specialist Disability Service atthe Oxford Centre for Enablement. We are an established manufacturer of custom contour seating and a specialist provider of mobile armsupports. We apply engineering principles and technology in the provision of services to meet the needs of individuals with disabilities. Thewheelchairs and seating systems we provide are individually specified prescriptions which frequently require custom made devices andmodifications to enable independence. The post holder will be required to manufacture and set up equipment as well as providing support to theRehabilitation Engineers.To arrange an informal discussion or visit please contact Zoe Hadley, Rehabilitation Engineering team lead, at only apply if you already have a right to work in the UK until October 2028 this role is not eligible for visa sponsorships.
Main duties of the job
We do not expect applicants to have
Experience
in all of these areas, but are looking for someone who is able to use tools and has the right attitude and aptitude for the role.The Technician will manufacture custom contour seating and wheelchair accessories in both milled foam and Lynx sheet either working toengineers' drawings or instructions.Training will be provided on our specific processes and manufacturing techniques.The Technician will manufacture parts and components for stock as requested and will also maintain local components stock.Post holders are expected to be able to use a range of hand and power tools.
About us
Oxford University Hospitals NHS Foundation Trustis one of the largest NHS teaching trusts in the country. It provides a wide range of general and specialist clinical services and is a base for medical education, training and research. The Trust comprises four hospitals - the John Radcliffe Hospital, Churchill Hospital and Nuffield Orthopaedic Centre in Headington and the Horton General Hospital in Banbury.Our values, standards and behaviours define the quality of clinical care we offer and the professional relationships we make with our patients, colleagues and the wider community.We call this Delivering Compassionate Excellence, and its focus is on our values of compassion, respect, learning, delivery, improvement and excellence.These values put patients at the heart of what we do and underpin the quality healthcare we would like for ourselves or a member of our family. Watch how we set out to deliver compassionate excellence via theOUH YouTube channel.In 2023NHS England launched its first sexual safety charter, and our Trust proudly signed it. We pledge zero tolerance for inappropriate sexual behaviour and commit to the ten core principlesOxford University Hospitals promotes a safe, respectful hiring environment.If you want to make a difference with us, come and join our team. Together, we will uphold the highest standards of care and professionalism.
Details
Date posted
04 November 2025
Pay scheme
Agenda for changeBandBand 4
Salary
£27,485 to £30,162 a year per annum
Contract
Fixed termDuration3 years
Working pattern
Full-time
Reference number
321-MRC-7571560-B4-EXT
Job location
sNuffield Orthopaedic CentreWindmill RoadOxfordOX3 7HE
Job description
Job responsibilities
The Technician will manufacture custom contour seating in both milled foam and Lynx sheet either working to engineers drawings or instructions.The Technician will manufacture parts and components for stock as requested and will also maintain local components stock. Comply with all health and Safety requirements Manufacture custom contour seating from Lynx and foam, working to engineers drawings or instructions. (including all elements ofmanufacture). Manufacture components for mobile arm supports and prepare mobile arm support kits for assessment and issue. Be responsible for monitoring and maintaining stock levels in the workshop areas. Communicate and work with staff in stores to ensuredepartmental stock levels in stores are maintained and highlight any issues with stock and suppliers. Source suppliers for parts and components. Manufacture and assemble components and parts for stock as requested using mechanical workshop skills. Monitor and maintain casting bags, performing regular checks and repairing damaged casting bags where possible. Produce patterns for upholstery work that will be outsourced to external companies. Communicate effectively with team members and external companies regarding technical and sensitive information. Upholstery work using a range of sewing machines and hand techniques. Assist Rehabilitation Engineering team members in clinics with technical work, assist with setting up equipment and assist with takingequipment to and from the clinic rooms and vans. Set up seating and accessories on wheelchairs working to instructions from the engineers and/or manufacturers instructions. Thisincludes custom manufactured parts and third party components. Document work completed and contribute to technical files and patient records. Set up and operate the CNC machine to manufacture custom contoured seating as specified by a rehabilitation Engineer. Set upfoam blocks, setup the CNC machine, check the toolpaths, remove foam blocks and clean CNC machine post machining. Contribute to servicing and maintenance of equipment. Maintain a schedule of work and diary appointments ensuring equipment is ready for planned appointments. Produce equipment to acommercial standard within tight deadlines. Assemble, manufacture and repair mechanical devices using hand tools and precision workshop machinery. Contribute to multi-disciplinary teams by discussing own and others input around clients needs. Communicate technical informationwhist taking account of the understanding of the target audience. Have an understanding of disabling conditions and their implications on equipment prescription and use. Attend and contribute to in-service training. Equipment management activities and technical work will occasionally require the post holder to work in awkward positions. It will frequently be necessary to maintain concentration whilst responding to requests from staff and clients for technical support. Thepost will involve occasional exposure to noise and dust in workshops.Complete drawings on CAD fusion 360.Other roles requested as appropriate at this level.
Job description
Person Specification
Qualifications
EssentialGrade C or above English and Maths GCSEsNVQ Level 2 Mechanical Engineering or equivalent training in practical engineering skills.DesirableMechanical Engineering QualificationBTEC level 2 Mechanical Engineering
Experience
EssentialSkilled in the use of mechanical workshop equipment independentlySkilled in the use of hand held power tools independentlyPractical approach to problem solvingProven ability to manufacture or assemble components to tight deadlinesDesirable
Experience
working with people with disabilitiesUnderstanding of disability issuesCompetent and
Experience
d in the manufacture of foam and Lynx seating systemsKnowledge of wheelchairs and seating componentsPersonal SkillsEssentialGood communication skillsSelf-motivated with ability to work independently on own initiativeWilling to learn new skillsMethodical and thorough approach to work activitiesSelf-organisedGood attention to detailAble to work under pressureAble to follow instructions from other team membersPhysically able to assist in moving and positioning people and equipmentBehavioural SkillsEssentialPrepared to adjust working hours to suit clinicsMethodical and thorough approach to work activitiesSelf-organisedTechnical SkillsEssentialCompetent in Microsoft Office applicationsExcellent dexterityDesirable
Experience
in CAD/CAM systems
Person Specification
Experience
in CAD/CAM systems
Disclosure and Barring Service Check
This post is subject to the Rehabilitation of Offenders Act (Exceptions Order) 1975 and as such it will be necessary for a submission for Disclosure to be made to the Disclosure and Barring Service (formerly known as CRB) to check for any previous criminal convictions.Employer
Details
Not sure?
If you're interested in this role but you have questions or you're not yet ready to apply, then please book a quick call with us and we'd be happy to answer any questions you have and tell you more about the role.
If you're interested in this role but you have questions or you're not yet ready to apply, then please book a quick call with us and we'd be happy to answer any questions you have and tell you more about the role.
Requirements
See the job description for full role requirements.
Benefits
Benefits are provided by the employer and will be confirmed during your application.
Is it a match?
A quick tap lets us tune future job matches for you
Location
Salary & benefits
Role duties
Working pattern
More information related to this job opportunity, from jobsincare:
inOxford
51.75197737680994 -1.2576470506267876 Oxford 
Locations
are approximate.
This image is not representative.
Learn more
Scan with your phone to return to this page later.